EducationContinuing Education System
AIA Continuing Education System: Health, Safety, Welfare
Health, Safety, Welfare (HSW) Guidelines
AIA members and other architects licensed in states with mandatory continuing education (MCE) requirements for license renewal are required to complete a minimum number of hours of Health, Safety, and Welfare (HSW)-related training. AIA members are required to take 8 learning unit (LU) hours of continuing education per year in approved HSW topics. Beginning in January 2012, AIA members will be required to complete 12 hours of health, safety, and welfare (HSW) education. Because many architects are required to take HSW courses and these courses are in high demand by both AIA members and architects licensed in states with MCE requirements in HSW, providers are encouraged to offer HSW education.
Health, Safety, Welfare (HSW) in architecture is anything that relates to the structural integrity or soundness of a building or building site. Courses must intend to protect the general public.
Health Aspects of architecture that have salutary effects among users of buildings or sites and address environmental concerns.
Examples: Accessibility; acoustical, energy efficiency, mechanical, plumbing, and electrical systems; and materials
Safety Aspects of architecture intended to limit or prevent accidental injury or death among users of the buildings or sites.
Examples: Codes, regulations, natural hazards, life safety system—suppression, detection, –alarm standards, provisions of fire-rated egress enclosures, automatic sprinkler systems, and stairs with correct rise-to-run proportions
Welfare Aspects of architecture that engender demonstrable positive emotional responses among, or enable equal access by, users of buildings or sites.
Examples: Building design and materials, methods and systems, construction contracting, ethics and regulations governing the practice of architecture, preservation, adaptive reuse, and the study of environmental issues.
Health, Safety, and Welfare Topics
Technical and professional subjects, that the NCARB Board deems appropriate to safeguard the public and that are within the following enumerated areas necessary for the proper evaluation, design, construction, and utilization of buildings and the built environment.
BUILDING SYSTEMS: Structural, Mechanical, Electrical, Plumbing, Communications, Security, Fire Protection
CONSTRUCTION CONTRACT ADMINISTRATION: Contracts, Bidding, Contract Negotiations
CONSTRUCTION DOCUMENTS: Drawings, Specifications, Delivery Methods
DESIGN: Urban Planning, Master Planning, Building Design, Site Design, Interiors, Safety and Security Measures
ENVIRONMENTAL: Energy Efficiency, Sustainability, Natural Resources, Natural Hazards, Hazardous Materials, Weatherproofing, Insulation
LEGAL: Laws, Codes, Zoning, Regulations, Standards, Life Safety, Accessibility, Ethics, Insurance to protect Owners and Public
MATERIALS and METHODS: Construction Systems, Products, Finishes, Furnishings, Equipment
PRE-DESIGN: Land Use Analysis, Programming, Site Selection, Site and Soils Analysis, Surveying
PRESERVATION: Historic, Reuse, Adaptation
Criterion #3: 75 percent of course content must be on HSW topics.
To qualify for HSW credit, 75 percent of a course’s content and instructional time must be on acceptable HSW topics, as outlined above. This means that if your course is 1 hour in length, at least 45 minutes (that is, 75 percent) must be spent discussing HSW topics.
In addition, AIA/CES requires that each provider course provide a minimum of four learning objectives. For HSW course qualification, however, three of the four mandatory course learning objectives (that is, 75 percent) must address HSW topics. This is one way that AIA/CES verifies that 75 percent of a course is actually on HSW topics.
For more information on learning objectives, please see the learning objectives section of the CES Provider Manual.
Criteria for HSW Course
AIA CES Provider Manual (.pdf)
AIA Member Care Center